Meyra 2.432 Specifiche Scaricare il pdf (Pagina 15)

15

GB

UNFOLDING THE WHEELCHAIR

– Tilt wheelchair to the side towards

you. – The outside driving wheel

must not have any contact with the

ground

– Press the inside seat tube down. –

The seat tubes must be placed in the

appropriate receptacles, (Fig. 49).

To unfold the wheelchair, carry out the

procedure for "FOLDING THE

WHEELCHAIR" in the reverse order

(from no. 10, see above).

Note:

Pos. No. 8

– The front support plates for the batte-

ry holder must be correctly fitted

(Fig. 50).

– The batteries must be inserted with

the safety fuses facing backwards

(Fig. 51).

Pos. No. 7

– Close the battery locking mechanism

(A, Fig. 45). – To carry this out, turn

the hand wheel (A) on the relevant

locking mechanism until you see it

click into place!

Check that the colour coded plugs are

correctly inserted and that they have

been properly connected!

Make a visual inspection of the cables

for external damage!

DISMANTLING FOR

TRANSPORTATION

The wheelchair can be dismantled into

several light components for simple

transportation. See Fig. 52.

A = Battery

B = Battery holder

C = Backrest

D = Frame with seat and chassis

E = Side part

F = Leg guard

G= Side part with control box

1. Taking off the legrests

Please refer to section entitled "LEG-

RESTS"

2. Removing the armrests

Please refer to the section entitled

SIDE PARTS and the section entitled

Lighting.

3. Removing the back

Please refer to section entitled

"BACK"

4. Fold up seat

5. Remove batteries

6. Lift out battery box

For a description of no. 4-6 please

refer to section entitled "FOLDING/

UNFOLDING"

Assembling the wheelchair

Carry out the above procedure in the

reverse order.

See no. 6 to 1.

Lifting out the battery holder:

7) Release the battery holder locking

mechanism (A, Fig. 45). – To carry

this out, pull back the hand wheel (A)

on the relevant locking mechanism,

then turn it by 90° to secure the now

open locking mechanism.

8) Lift out the battery holder to the back

(Fig. 46). – First lift the back part of

the battery holder out of the guide

rails. Care is needed due to the

small bearing surface on the front

support plates.

Folding procedure:

9) Lift up the footrests or remove the le-

grests (please refer to section entit-

led "Legrests").

10) Take hold of the stabiliser rod at

the centre and lift or press up (Fig.

47).

11) To fold, tip the wheelchair slightly

towards you and pull the

wheelchair sides together, (Fig.

48).

FOLDING/UNFOLDING

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Commenti su questo manuale

Nessun commento